#8-023 HIGH FLOW PUMP DISCHARGE FITTING 1999-2003

1999-2003 High Flow Discharge Hose Fitting
High Pressure Oil Pump

This discharge hose fitting comes complete with Genuine Viton^® interior and exterior o-rings. The fitting has been drilled out to accomodate the full flow of oil from the pump without the restriction of the backcheck springs and seat. Modified pumps such as Terminator Engineering's T500^® have removed these check valves as part of the standard modification.

If you wish to continue using your check valves that come with the stock pump, please order the 8-021 pump fittings.

We include 1 package of LocTite 680 sealing compound with each order of 1 or 2 fittings. The LocTite 680 is required to properly seal the fitting into the pump. Apply the compound on the first 3 threads of the fitting and allow at least 3 hours cure time prior to attempting to restart the engine. The threads on both the pump and the fitting must be cleaned with Brake Clean so there is no oil film prior to applying the LocTite compound.

Item #8-023

Order of 1 = 1 fitting and 1 packet of LocTite 680
Order of 2 = 2 fittings and 1 packet of LocTite 680