3 - piece O-ring IPR Repair Kit All of our O-rings are Made in the USA!
Internal o-ring and fiber backup split ring along with the IPR to HPOP sealing o-ring
Replace the worn o-ring and split backup ring that can cause poor performance and lost fuel mileage with this economical kit.The internal o-ring can get worn and have high pressure oil leak by and cause rough idle and poor performance. You may not need a new IPR valve, just replace the worn out seals.
This kit has the o-rings and split washer that the more expensive IPR re-seal kit but does not supply the metal spacer and tin nut.
The advantage that this kit has is that this kits o-rings are made of DuPont Viton, not Nitrile as in the Ford kit.
The kit contains the internal Viton o-ring and backup ring that seals the pump's high pressure oil from the regulated oil pressure that feed the engine's oil rail. It also contains a Viton o-ring to seal the IPR to the pump body and an instruction sheet.
Here is a plug that will make the job easier with little or no cleanup afterwards. This plug will tightly seal the IPR opening with no additional loss of oil into the engine valley. Simply push it in and pull it back out when you are ready to re-install the IPR after servicing it.
See the checkbox on the upper part of this page to order one now!