Product details
Product ID: #7-003 - Complete Bowl Seal Kit - 11 o-rings and 4 sleeves





Description:

  •  Complete Fuel Bowl Seal Kit

    Featured Tech Article in 8 LUG magazine June 2010 using this kit

    11 Viton o-rings and 4 Parker® fuel sleeves. 3 Viton (type A) or 3 Viton (type B) or or 3 Fluorosilicone o-rings for the 7.3 yellow fuel drain valve core

    1. 1 o-ring for the drain valve stem
    2. 2 o-rings for the drain valve to bowl seals
    3. 2 o-rings for the Water-in-Fuel sensor/Fuel Heater
    4. 1 o-ring for the Fuel Pressure Regulator housing
    5. 1 o-ring for the regulator piston bushing
    6. 2 o-rings for the fuel back check piston assembly
    7. 2 o-rings for bowl plugs
    8. 2 - 1/4" sleeves for the fuel lines feeding the cylinder heads
    9. 1 - 5/16" sleeve for the fuel return line
    10. 1 - 3/8" sleeve for the fuel feed line.

    Order of 1 is a set of 11 o-rings and 4 sleeves.

    NOTE: If you remove the fuel rail lines from the cylinder heads, this kit contains the fuel sleeves for the filter bowl ends only. It is recommended to also replace the sleeves on the cylinder head end of the fuel rail lines once they have been removed as they will no longer seal properly.  Order part # 7-004 to supplement this kit.

     

    viton
    Durometer Shore: Shore A: 75 Viton

    SAE Specification:     SAE J200

    Shelf Life: Flurorsilicone - 20 years
                                       Viton - Indefinite      

    Model Year 99-03 7.3L diesel. F-series / E-series.

     

    Choices of Types of Drain Valve o-rings

    • Black Viton bi-monometer compound-Viton (A)
    • Brown Viton tri-monometer compound-Viton (B)
    • Blue MilSpec M25988/2 Fluorosilicone.

    ParkerFrom Parker Hannifin :
    "In the automotive market, fluorosilicones are the seal material of choice for handling gasoline, E85, diesel fuel, biodiesel and ULSD at extremely low temperatures."
    Select the type of compound from the drop down at the bottom of the page.

     

    Differences between the black Viton (A), Brown Viton (B) or the Blue Fluorosilicone fuel drain o-rings sold on this page:

    • The black Viton o-rings are polymerized from two monomers, vinylidene fluoride and hexafluoropropylene (Viton type A).

    • The brown Viton o-rings  (Viton type B)are polymerized from three monomers, vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene. The terpolymer blend of Viton has shown to have additional resistance to fuel permeation ans swell when used with ULSD and BioDiesel than standard Viton (A).

    • The Blue Fluorosilicone has a much wider temperature range than Viton (A) or Viton (B) and is widely used in extream environmental conditions. They will stay flexible in artic conditions down to -70º F.

    Includes o-ring size identification comparison and location chart. Shipped with order.

    Complete Fuel Bowl Rebuild Instruction Sheet - 10 Pages! :

    1.5MB Adobe Acrobat File - Very Large File

    You must have Adobe Acrobat reader installed on your computer to download this document.

     Item #7-003


Price/piece: $17.00


Type_of_Drain_Valve_O-rings:

Quantity:  

Back to the list

Product Reviews
Reviews for: : #7-003 - Complete Bowl Seal Kit - 11 o-rings and 4 sleeves

05-11-2009 -- 89blackbeauty
I did the fuel bowl R&R with the o-ring kit from Guzzle. Great write up, everything was there, pretty easy to do. FYI if you ever do anything that requires removing the fuel bowl (like adding an Adrenaline HPOP), get the fuel bowl o-ring kit from Guzzle, I did not (got advice a little too late), and I paid for it dearly. If you crack the threads off of the FPR, there is no way to fix it other than new FPR (~$50) and new supply and return lines (~$120) and hours of cursing while under (and over) the truck because everything that could go wrong did. But hey - guzzle has a great kit, and it worked well.

12-10-2009 -- keydiverfla
GREAT kit, GREAT instructions! I am reccomending this to everyone I know that has a powerstroke.

1-03-2010 -- bruno4x4
Thank you very much! Bob your customer service, knowledge of products and repair is great! I installed the fuel bowl seal kit and fuel bowl heater the instructions were perfect.I will be sure to let all my North West diesel driving pals about your company. Thank you very much - David

02-24-2010 -- midnightsungara
Thanks for the outstanding instructions! Hopefully these o-rings will stand up to the extreme cold conditions we have here in the interior of Alaska. Thanks Bob.

   You must be registered and logged in to submit a review